Pole Shaft

The shaft is extruded from all new 6063 alloy aluminum tubing and heat treated to produce a T6 temper. These standards may be drilled to accept side arm mounted luminaires. Mounting orientation must be provided. An aluminum tenon may also be supplied as standard.

Hinged Base Casting

Cast from A356 alloy aluminum, the anchor base is heat treated to produce a T6 condition and inserted into the anchor base casting. The two pieces are joined by a continuous circumferential weld at the outside top and inside bottom of the anchor base. The base has a hinge pin to allow lowering of the pole to maintain luminaires.

Product Line
Part Number Mounting Height Effective Projected Area Shaft Dimensions Base Info Base Plate Spec Sheet
80 90 100 120 Rd. Wall Thick. Anchor Bolt Diameter Bolt Circle Square Height
SLP-RSHA-4-8-1 8 11.1 8.7 6.7 4.7 4 0.125 .75 x 20 7.5 – 9 10.75 3.5 SLP-RSHA-4-8-11
SLP-RSHA-4-10-1 10 8.5 6.5 4.9 3.2 4 0.125 .75 x 20 7.5 – 9 10.75 3.5 SLP-RSHA-4-10-11
SLP-RSHA-4-12-1 12 6.6 5 3.7 2.1 4 0.125 .75 x 20 7.5 – 9 10.75 3.5 SLP-RSHA-4-12-11
SLP-RSHA-5-12-1 12 10.9 8.4 6.3 4.4 5 0.125 .75 x 20 7.5 – 9 10.75 3.5 SLP-RSHA-5-12-11
SLP-RSHA-5-14-1 14 8.8 6.7 4.9 3.5 5 0.125 .75 x 20 7.5 – 9 10.75 3.5 SLP-RSHA-5-14-11
SLP-RSHA-5-16-1 16 7.2 5.3 3.7 2.4 5 0.125 .75 x 20 7.5 – 9 10.75 3.5 SLP-RSHA-5-16-11
SLP-RSHA-5-16-3 16 11.6 8.8 6.5 4.4 5 0.188 .75 x 20 7.5 – 9 10.75 3.5 SLP-RSHA-5-16-31
SLP-RSHA-5-18-3 18 9.8 7.3 5.3 3.3 5 0.188 .75 x 20 7.5 – 9 10.75 3.5 SLP-RSHA-5-18-31
SLP-RSHA-5-20-1 20 4.7 3.2 1.9 1 5 0.125 .75 x 20 7.5 – 9 10.75 3.5 SLP-RSHA-5-20-11
SLP-RSHA-5-20-3 20 8.2 6 4.1 2.6 5 0.188 .75 x 20 7.5 – 9 10.75 3.5 SLP-RSHA-5-20-31
SLP-RSHA-6-20-3 20 12.8 9.5 6.8 4.9 6 0.188 .75 x 20 8.5 – 9 10.75 3.5 SLP-RSHA-6-20-31