Pole Shaft Specifications

The pole shaft is fabricated from a weldable-grade, hot-rolled commercial quality carbon steel ASTM A-595 Grade A with a guaranteed minimum yield strength of 55,000 psi after fabrication. It is a one- or two-piece* construction with a full-length, longitudinal weld. The pole tapers at a rate of 0.14″ per foot.

Base Plate Cover

A full base plate cover is supplied. For 20-35′ poles, the base cover is automotive structural grade ABS plastic with a UV inhibitor to eliminate color fading. It is rust proof and tamper resistant. For 39-60′ poles, the base cover is made of two-piece formed sheet steel.

*Poles greater than 39′ are of two-piece, slipfit construction – We reserve the right to use a pole-top adaptor for direct mounting of fixtures, as deemed necessary.*
Part Number Mounting Height Effective Projected Area Shaft Dimensions Base Info Base Plate Spec Sheet
80 90 100 120 Butt Top Wall Anchor Bolt Diameter Bolt Circle Square Height
SLP-RTS-20-5211 20 12.2 9.8 7.9 5.6 5.2 2.4 11 .75 x 28 9.5 10 0.75 View
SLP-RTS-20-6511 20 28.6 23.2 18.7 13 6.5 3.7 11 1 x 40 10 11 1 View
SLP-RTS-25-5911 25 9.4 7.6 6.2 4.4 5.9 2.4 11 .75 x 28 9.5 10 0.75 View
SLP-RTS-25-7011 25 22 17.8 14.4 10 7 3.5 11 1 x 40 10 11 1 View
SLP-RTS-30-6511 30 8.1 6.6 5.3 3.8 6.6 2.4 11 1 x 40 10 11 1 View
SLP-RTS-30-8-0-11 30 22.1 17.9 14.5 10 8 3.8 11 1 x 40 11 12 1 View
SLP-RTS-35-8-5-11 35 19.3 15.6 12.6 9 8.5 3.6 11 1 x 40 11.5 12 1 View
SLP-RTS-39-9-0-11 39 17.9 14.5 11.7 8.2 9 3.5 11 1 x 40 12.5 13 1 View
SLP-RTS-39-1011 39 23.3 18.8 15.2 10.7 10 4.7 11 1 x 40 13.5 14 1 View
SLP-RTS-39-1207 39 63.4 51.3 41.4 29 12 6.7 7 1.5 x 60 16 17 1.5 View
SLP-RTS-45-1011 45 12.5 10.1 8.2 5.8 10 3.9 11 1 x 40 13.5 14 1 View
SLP-RTS-45-1207 45 40.8 33 26.7 18.8 12 5.8 11-Jul 1.5 x 60 16 17 1.5 View
SLP-RTS-50-1011 50 9.3 7.6 6.1 4.3 10 3.1 11 1 x 40 13.5 14 1 View
SLP-RTS-50-1207 50 33.4 27.1 21.8 15.3 12 5.1 11-Jul 1.5 x 60 16 17 1.5 View
SLP-RTS-60-1207 60 19.2 15.5 12.5 8.8 12 5.1 11-Jul 1.5 x 60 16 17 1.5 View